Auto Sealing Beverage Equipment carbonated soft Drink Bottling Production Line Beer Can Filling Canning Machine
1. Model GF12-1
2.Capacity : 1500BPH (500ml)
3. Suitable : Plastic bottle 250ml-2000ml
4. Machine size : 1750x1250x2200mm
5.Machine electric brand : SIEMENS , MITSUBISHI, Schneider
6.Machine power : 1.5KW
7. Machine weight : 2200kg
8. Machine include function : Filling Capping
9. Application: Beverage, water , cola , beer , juice , oil
Beer can filling-sealing 2-1 machine is a filling sealing 2 in 1 machine designed combined with the actual situation in our country after the introduction and absorption.
It is used to clean empty can in canning production line. Empty cans will be sent to turning device first, which will be turned around then transferred into rinsing machine. Empty can will be running from top to bottom along the turning device. When empty cans enter into rinser, they will be cleaned by 80℃ hot water (provided by customer) to reach aseptic state of can. There is certain inclination angle in both sides of rinser, whose size could be adjusted properly when needed. Empty cans will be rolling in parallel way from top to end; the waste water will be discharged from outfall
It is suitable for filling and capping carbonated beverage such as beer, CSD, etc. It is equipped the advanced device, electrical equipment, and pneumatic control technology. It has the characteristics of filling reposefully, high speed, liquid level control, capping reliably, frequency conversion timing, less material loss. It can be equipped long-distance control system. It is the preferred equipment for the medium beer and beverage plant.
| Model | GF12-1 | GF18-4 | GF24-6 |
| Capacity | 1200-1500cans/hour | 5000-6000 CPH | 7000-9000 CPH |
| Can volume | 200ml-1000ml | 200ml-1000ml | 200ml-1000ml |
| Can diameater | 50-70mm | 50-70mm | 50-70mm |
| Bottle high | 120-170mm | 120-170mm | 120-170mm |
| Machine power | 1.5KW | 2.2KW | 3.7KW |
| Machine size | 175x120x195CM | 305x175x220CM | 340X195X220CM |
| S/N | Name | Brand | Country |
| 1 | Main motor | ABB | Switzerland |
| 2 | Inverter | MITSUBISHI | Japan |
| 3 | PLC | OMRON | Japan |
| 4 | Touch screen | MITSUBISHI | Japan |
| 5 | Contactor | SCHNEIDER | France |
| 6 | Thermo- relay | SCHNEIDER | France |
| 7 | Air-break switch | SCHNEIDER | France |
| 8 | Proximity switch | TURCK | USA |
| 9 | Photoelectric switch | BANNER | USA |
| 10 | Air circuit system | SMC | Japan |
| 11 | Water pump | Southern | Japan |
Zhangjiagang City Bievo Machinery Co., Ltd. is located in a national level development zone - Zhangjiagang Economic And Technology Development Zone, covering area more than 8,000 square meters.We enjoy convenient transportation with Shanghai Hongqiao International Airport and Shanghai Pudong International Airport on hand.Which accumulated a great number of China's top technologists in the liquid beverage industry.We have complete system from designing, manufacturing, installation, training to after service.Our main product water production line, carbonated beverage production line . Fruit juice and milk production line ,3 to 5 gallons production line, daily chemical production line and so on.Plat and tube UHT device, CIP system.All the products are sold well.We devote ourselves to the development, research and production of liquid food and beverage filling and packing industry .
Q1: Where is your factory? How can I visit there?
A1: Our location is No.66, Baixiong Road, Sanxing Town, Zhangjiagang City, Jiangsu Province, China
Our factory is nearby from Shanghai City, if you fly from abroad, we can pick you up at the airport.
Q2: What's your payment stipulation?
A2: Our standard payment is 30% of the total amount for deposit, pay the balance before the shippment. For the others,
we can further discuss.
Q3: Do you have technicians for installation?
A3: We are responsible for the installaion in your country, you can also arange your staffs to our factory to learn how to operate the complete line.
Q4: How about the spare parts?
A4: We will send one year enough easy broken spare parts together with the machines when shipping, In the course of the warranty time, we can delivery you including the cost and fees.
Installation and commissioning
After the equipments arrived buyer's workshop, the buyer should take it's place for each equipment according to the supplied layout; the seller will send the experienced technician to guide the installation and debugging and trail production, and fulfil the designed capability within the designed time. The installation, debugging and training is about 30-35 days
Training
The seller will supply technical training to the buyer. The training is includes: equipment structure and maintenance, control and operation. After training, the technicians of the buyer will grasp relevant operation and maintenance skills, and could adjust the technologies more skilled, and can deal with all kinds of malfunction in time.
After-sales service
1) After qualified of the equipment, the seller will supply one year guarantee, control system one year guarantee, free charge for wearing parts, and other spare parts with cost price. Within guarantee period, the technicians who accepted training should strictly obey the requirements asked by the seller to operate the equipments and maintenance, to find the common malfunctions and fault clearing in time; if the technicians of the buyer couldn't solve the problems themselves, the after-sales department will supply long range guide service by phone; if relevant measurements couldn't solve the problems, the seller will send the technicians to the buyer factory, clear the fault or relevant technical problems on site, the charges will reference to the installation and debugging charges.
2) After guaranteed, the seller will supply widely favorable technical support, after-sales service for the lifetime: favorable price for the wearing parts and other spare parts.
Product Tags:
|
|
2000bph Automatic Aluminum Can DRAFT Beer Filling Machine Images
|
